![]() ![]() Allow to dry for 30 days before replacing furniture and rugs. Allow to dry overnight for light traffic. Do not close off ventilation after applying DuraSeal ® Polyurethane. Do not apply DuraSeal ® Polyurethane during extremely cold or humid weather. Do not use steel wool or burnish the surface before applying DuraSeal ® Polyurethane. Allow extra drying time when applying over floors that have been stained. Do not apply DuraSeal ® Polyurethane over floors previously finished with wax, shellac, lacquer, or stains containing wax or stearates. Proceed from step 2 under New Wood Floors.ĭuraSeal ® Polyurethane will have an ambering effect when applied over light colored surfaces.Remove all dust with a broom and/or vacuum and tack floor with a cloth moistened with mineral spirits.Sand the floor to bare wood according to NWFA approved methods.Proceed from step 3 under New Wood Floors.Previously finished with shellac, lacquer, wax or stains containing stearates or wax. NOTE: Do not apply DuraSeal ® Polyurethane over floors Clean floors with an abrasive pad moistened with mineral spirits to remove all grease, oil, dirt, and soap residue. ![]() If allowed to dry more than 24 hours, abrade thoroughly. Abrade with a maroon pad with sanding strips or a 120 grit screen between each coat. If desired, additional coats of DuraSeal ® Polyurethane may be applied.Apply a second coat of DuraSeal ® Polyurethane in the same manner as the first. Tack floor with a cloth moistened with mineral spirits to remove dust. If allowed to dry more than 24 hours abrade thoroughly. Abrade with a maroon pad with sanding strips or a 120 grit screen. ![]() NOTE: Application of thicker coats results in extended drying time. Lambs wool applicator in thin coats, at a coverage rate of 500 square feet per gallon (750 square feet per gallon for 450 VOC compliant product). Apply DuraSeal ® Polyurethane with a brush or
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |